<![CDATA[ -- ZyXEL Communications Corporation
-- Private Enterprise MIB definition - Calvin Chai
-- 04/30/96
-- This file describes the ZyXEL Communications Corporation Enterprise MIB.
-- It includes object identifiers and object definitions for the ZyXEL
-- Enterprise MIB only, and should be used for compilation by a management
-- tool in order to extend the tool to support the ZyXEL MIB.
ZYXEL-MIB DEFINITIONS ::=BEGIN
IMPORTS
enterprises, NetworkAddress, PhysAddress, IpAddress, Counter
FROM RFC1155-SMI
OBJECT-TYPE
FROM RFC1212;
DisplayString ::= OCTET STRING
-- tree structure
ZyXEL OBJECT IDENTIFIER ::= { enterprises 890 }
Products OBJECT IDENTIFIER ::= { ZyXEL 1 }
Prestige OBJECT IDENTIFIER ::= { Products 1 }
pSysVariables OBJECT IDENTIFIER ::= { Prestige 1 }
pBRIVariables OBJECT IDENTIFIER ::= { Prestige 2 }
pIPXVariables OBJECT IDENTIFIER ::= { Prestige 3 }
pAPTVariables OBJECT IDENTIFIER ::= { Prestige 4 }
pBRGVariables OBJECT IDENTIFIER ::= { Prestige 5 }
pDialInVariables OBJECT IDENTIFIER ::= { Prestige 6 }
pRemoteNodeVariables OBJECT IDENTIFIER ::= { Prestige 7 }
pRemoteUserVariables OBJECT IDENTIFIER ::= { Prestige 8 }
-- Node: ZyXEL
-- Node: Products
-- Node: Prestige
-- Node: pSysVariables This group contains information dealing
-- wish the overall Prestige system, such as
-- software versions, feature bits...etc.
pSysRasSWVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current RAS software version."
::= { pSysVariables 1 }
pSysIsdnFWVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current ISDN firmware version."
::= { pSysVariables 2 }
pSysRouteIP OBJECT-TYPE
SYNTAX INTEGER {
No(1),
Yes(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Determines if TCP/IP is enabled."
::= { pSysVariables 3 }
pSysRouteIPX OBJECT-TYPE
SYNTAX INTEGER {
No(1),
Yes(2),
NA(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Determines if IPX is enabled."
::= { pSysVariables 4 }
pSysRouteAPT OBJECT-TYPE
SYNTAX INTEGER {
No(1),
Yes(2),
NA(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Determines if AppleTalk is enabled."
::= { pSysVariables 5 }
pSysBridge OBJECT-TYPE
SYNTAX INTEGER {
No(1),
Yes(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Determines if Bridging is enabled."
::= { pSysVariables 6 }
-- Node: pBRIVariables This group defines the ISDN variables.
pBRISwitchType OBJECT-TYPE
SYNTAX INTEGER {
NorTelCustom(1),
AT&TNI-1(2),
DSS1(3),
1TR6(4),
AT&TP2P(5),
AT&TP2M(6),
NorTelNI-1(7),
AT&TNI-1(8),
AT&TP2M(9),
NorTelNI-1(10)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Identifies the ISDN switch type."
::= { pBRIVariables 1 }
pBChannelUsage OBJECT-TYPE
SYNTAX INTEGER {
Switch-Unused(1),
Switch-Switch(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Idenitifes how the B channels are used."
::= { pBRIVariables 2 }
p1stPhoneNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"First telephone number."
::= { pBRIVariables 3 }
p1stSpidNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"First SPID number."
::= { pBRIVariables 4 }
p1stAnalogCall OBJECT-TYPE
SYNTAX INTEGER {
None(1),
Modem(2),
Voice(3),
Data(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"How the 1st channel will handle an analog call."
::= { pBRIVariables 5 }
p2ndPhoneNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Second telephone number."
::= { pBRIVariables 6 }
p2ndSpidNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Second SPID number."
::= { pBRIVariables 7 }
p2ndAnalogCall OBJECT-TYPE
SYNTAX INTEGER {
None(1),
Modem(2),
Voice(3),
Data(4),
NA(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"How the 2nd channel will handle an analog call."
::= { pBRIVariables 8 }
-- Node: pIPXVariables Defines the IPX variables for the Prestige
pFrameType8022 OBJECT-TYPE
SYNTAX INTEGER {
No(1),
Yes(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Frame type 802.2 is enabled."
::= { pIPXVariables 1 }
pSeedRouter8022 OBJECT-TYPE
SYNTAX INTEGER {
No(1),
Yes(2),
NA(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Defines if this is a seed router."
::= { pIPXVariables 2 }
pNetworkNumber8022 OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Defines the network address for this frame type."
::= { pIPXVariables 3 }
pFrameType8023 OBJECT-TYPE
SYNTAX INTEGER {
No(1),
Yes(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Frame type 802.3 is enabled."
::= { pIPXVariables 4 }
pSeedRouter8023 OBJECT-TYPE
SYNTAX INTEGER {
No(1),
Yes(2),
NA(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Defines if this is a seed router."
::= { pIPXVariables 5 }
pNetworkNumber8023 OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Defines the network address for this frame type."
::= { pIPXVariables 6 }
pFrameTypeEthernetII OBJECT-TYPE
SYNTAX INTEGER {
No(1),
Yes(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Frame type Ethernet II is enabled."
::= { pIPXVariables 7 }
pSeedRouterEthernetII OBJECT-TYPE
SYNTAX INTEGER {
No(1),
Yes(2),
NA(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Defines if this is a seed router."
::= { pIPXVariables 8 }
pNetworkNumberEthernetII OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Defines the network address for this frame type."
::= { pIPXVariables 9 }
pFrameTypeSnap OBJECT-TYPE
SYNTAX INTEGER {
No(1),
Yes(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Frame type SNAP is enabled."
::= { pIPXVariables 10 }
pSeedRouterSnap OBJECT-TYPE
SYNTAX INTEGER {
No(1),
Yes(2),
NA(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Defines if this is a seed router."
::= { pIPXVariables 11 }
pNetworkNumberSnap OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Defines the network address for this frame type."
::= { pIPXVariables 12 }
pIPXRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF pIPXRouteEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each row of the table provides the information for
an IPX static route."
::= { pIPXVariables 13 }
pipxRouteEntry OBJECT-TYPE
SYNTAX pIPXRouteEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The object type of the rows in pIPXRouteTable."
INDEX { pIpxRtIndex }
::= { pIPXRouteTable 1 }
pIPXRouteEntry ::= SEQUENCE {
pIpxRtIndex INTEGER,
pIpxRtServerName DisplayString,
pIpxRtActive INTEGER,
pIpxRtNetworkNumber DisplayString,
pIpxRtNodeNumber DisplayString,
pIpxRtSocketNumber DisplayString,
pIpxRtTypeNumber DisplayString,
pIpxRtHopCount INTEGER,
pIpxRtTickCount INTEGER,
pIpxRtGatewayNode INTEGER
}
pIpxRtIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index of the route entry."
::= { pipxRouteEntry 1 }
pIpxRtServerName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of the IPX route."
::= { pipxRouteEntry 2 }
pIpxRtActive OBJECT-TYPE
SYNTAX INTEGER {
No(1),
Yes(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Determines if the route is active or not."
::= { pipxRouteEntry 3 }
pIpxRtNetworkNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The network number for this IPX route."
::= { pipxRouteEntry 4 }
pIpxRtNodeNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The node number for this IPX route."
::= { pipxRouteEntry 5 }
pIpxRtSocketNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The socket number for this IPX route."
::= { pipxRouteEntry 6 }
pIpxRtTypeNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE (0.255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type number for this IPX route."
::= { pipxRouteEntry 7 }
pIpxRtHopCount OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The hop count for this IPX route."
::= { pipxRouteEntry 8 }
pIpxRtTickCount OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The tick count for this IPX route."
::= { pipxRouteEntry 9 }
pIpxRtGatewayNode OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The remote node number that serves as the gateway
for this IPX route."
::= { pipxRouteEntry 10 }
-- Node: pAPTVariables
pAPTSeedRouter OBJECT-TYPE
SYNTAX INTEGER {
No(1),
Yes(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Determines if this is a seed router."
::= { pAPTVariables 1 }
pAPTNetworkMin OBJECT-TYPE
SYNTAX INTEGER {
NA(65536)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The network minimum number for the range."
::= { pAPTVariables 2 }
pAPTNetworkMax OBJECT-TYPE
SYNTAX INTEGER {
NA(65536)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The network maximum number for the range."
::= { pAPTVariables 3 }
pAPT1stZoneName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"1st AppleTalk zone name."
::= { pAPTVariables 4 }
pAPT2ndZoneName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"2nd AppleTalk zone name."
::= { pAPTVariables 5 }
pAPTZipTimeout OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Zip Timeout."
::= { pAPTVariables 6 }
pAPTRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF pAPTRouteEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each row of this table provides the information for
an AppleTalk static route."
::= { pAPTVariables 7 }
paptRouteEntry OBJECT-TYPE
SYNTAX pAPTRouteEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The object type of the rows in pAPTRouteTable."
INDEX { pAptRtIndex }
::= { pAPTRouteTable 1 }
pAPTRouteEntry ::= SEQUENCE {
pAptRtIndex INTEGER,
pAptRt1stZoneName DisplayString,
pAptRt2ndZoneName DisplayString,
pAptRtNetworkMin INTEGER,
pAptRtNetworkMax INTEGER,
pAptRtActive INTEGER,
pAptRtMetric INTEGER,
pAptRtGatewayNode INTEGER
}
pAptRtIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The row index for the static route."
::= { paptRouteEntry 1 }
pAptRt1stZoneName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"1st zone name for this static route."
::= { paptRouteEntry 2 }
pAptRt2ndZoneName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"2nd zone name for this static route."
::= { paptRouteEntry 3 }
pAptRtNetworkMin OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Network min number for this static route."
::= { paptRouteEntry 4 }
pAptRtNetworkMax OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Network max number for this static route."
::= { paptRouteEntry 5 }
pAptRtActive OBJECT-TYPE
SYNTAX INTEGER {
No(1),
Yes(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Determines if this static route is active."
::= { paptRouteEntry 6 }
pAptRtMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Metric for this static route."
::= { paptRouteEntry 7 }
pAptRtGatewayNode OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Gateway remote node for this static route."
::= { paptRouteEntry 8 }
-- Node: pBRGVariables
pBRGHandleIpx OBJECT-TYPE
SYNTAX INTEGER {
None(1),
Client(2),
Server(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Determines how Prestige should handle IPX."
::= { pBRGVariables 1 }
pBRGRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF pBRGRouteEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each row of this table provides the information for
a Bridge static route."
::= { pBRGVariables 2 }
pbrgRouteEntry OBJECT-TYPE
SYNTAX pBRGRouteEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The object type of the rows in pBRGRouteTable."
INDEX { pBrgRtIndex }
::= { pBRGRouteTable 1 }
pBRGRouteEntry ::= SEQUENCE {
pBrgRtIndex INTEGER,
pBrgRtRouteName DisplayString,
pBrgRtActive INTEGER,
pBrgRtEtherAddress DisplayString,
pBrgRtIpAddress IpAddress,
pBrgRtGatewayNode INTEGER
}
pBrgRtIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The row index for the static route."
::= { pbrgRouteEntry 1 }
pBrgRtRouteName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Route name for this static route."
::= { pbrgRouteEntry 2 }
pBrgRtActive OBJECT-TYPE
SYNTAX INTEGER {
No(1),
Yes(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Determines if this static route is active."
::= { pbrgRouteEntry 3 }
pBrgRtEtherAddress OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The ethernet address for this static route."
::= { pbrgRouteEntry 4 }
pBrgRtIpAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The ip dress for this static route."
::= { pbrgRouteEntry 5}
pBrgRtGatewayNode OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Gateway remote node for this static route."
::= { pbrgRouteEntry 6 }
-- Node: pDialInVariables This group contains information for
-- the default dial-in parameters.
pDIClidAuthen OBJECT-TYPE
SYNTAX INTEGER {
None(1),
Required(2),
Preferred(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"CLID authentication status for incoming calls."
::= { pDialInVariables 1 }
pDIRecvAuthen OBJECT-TYPE
SYNTAX INTEGER {
CHAP-PAP(1),
CHAP(2),
PAP(3),
None(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Determines the type of authentication for incoming
calls."
::= { pDialInVariables 2 }
pDILinkCompression OBJECT-TYPE
SYNTAX INTEGER {
None(1),
Stac(2),
V.42bis(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Determines the type of compression algorithm used."
::= { pDialInVariables 3 }
pDIMaxTransferRate OBJECT-TYPE
SYNTAX INTEGER {
128k(1),
64k(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Maximum transfer rate allowed."
::= { pDialInVariables 4 }
pDIIdleTimeout OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The default idle timeout value."
::= { pDialInVariables 5 }
pDIIpAddressSupply OBJECT-TYPE
SYNTAX INTEGER {
User(1),
Pool(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"How the IP address is supplied."
::= { pDialInVariables 6 }
pDIIpPoolStartAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IP pool start address."
::= { pDialInVariables 7 }
pDIIpPoolCount OBJECT-TYPE
SYNTAX INTEGER {
NA(1000)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of IP pool address to use."
::= { pDialInVariables 8 }
pDIIpxPool OBJECT-TYPE
SYNTAX INTEGER {
No(1),
Yes(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Use IPX pool to assign IPX network number."
::= { pDialInVariables 9 }
pDIIpxPoolStartNetNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Starting IPX net number in the pool."
::= { pDialInVariables 10 }
pDIIpxPoolCount OBJECT-TYPE
SYNTAX INTEGER {
NA(1000)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IPX pool count number."
::= { pDialInVariables 11 }
-- Node: pRemoteNodeVariables
pRemoteNodeTable OBJECT-TYPE
SYNTAX SEQUENCE OF pRemoteNodeEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each row of this table provides the information for
one remote node."
::= { pRemoteNodeVariables 1 }
premoteNodeEntry OBJECT-TYPE
SYNTAX pRemoteNodeEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The object type of the rows in pRemoteNodeTable."
INDEX { pRNIndex }
::= { pRemoteNodeTable 1 }
pRemoteNodeEntry ::= SEQUENCE {
pRNIndex INTEGER,
pRNName DisplayString,
pRNActive INTEGER,
pRNCallDirection INTEGER,
pRNRemLogin DisplayString,
pRNRemClid DisplayString,
pRNCallBack INTEGER,
pRNMyLogin DisplayString,
pRN1stPhoneNumber DisplayString,
pRN2ndPhoneNumber DisplayString,
pRNRouteType INTEGER,
pRNBridgeEnabled INTEGER,
pRNEncapsulation INTEGER,
pRNIpAddress IpAddress,
pRNTransferRate INTEGER,
pRNIdleTimeout INTEGER
}
pRNIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Row number for this node in the remote node table."
::= { premoteNodeEntry 1 }
pRNName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Descriptive name to identify the remote node."
::= { premoteNodeEntry 2 }
pRNActive OBJECT-TYPE
SYNTAX INTEGER {
No(1),
Yes(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"To set the remote node active or inactive."
::= { premoteNodeEntry 3 }
pRNCallDirection OBJECT-TYPE
SYNTAX INTEGER {
Both(1),
Incoming(2),
Outgoing(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Call direction for the remote node."
::= { premoteNodeEntry 4 }
pRNRemLogin OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Remote node login name."
::= { premoteNodeEntry 5 }
pRNRemClid OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Remote node CLID number."
::= { premoteNodeEntry 6 }
pRNCallBack OBJECT-TYPE
SYNTAX INTEGER {
No(1),
Yes(2),
NA(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Remote node callback enabled or not."
::= { premoteNodeEntry 7 }
pRNMyLogin OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Your login name for a call to a remote node."
::= { premoteNodeEntry 8 }
pRN1stPhoneNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Primary phone number for the remote node."
::= { premoteNodeEntry 9 }
pRN2ndPhoneNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Secondary phone number for the remote node."
::= { premoteNodeEntry 10 }
pRNRouteType OBJECT-TYPE
SYNTAX INTEGER {
None(1),
IP(2),
IPX(3),
AppleTalk(4),
IP-IPX(5),
IP-AppleTalk(6),
IPX-AppleTalk(7),
IP-IPX-AppleTalk(8)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Route capabilities for this remote node."
::= { premoteNodeEntry 11 }
pRNBridgeEnabled OBJECT-TYPE
SYNTAX INTEGER {
No(1),
Yes(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Bridging enabled or disabled."
::= { premoteNodeEntry 12 }
pRNEncapsulation OBJECT-TYPE
SYNTAX INTEGER {
PPP(1),
Ascend(2),
Microsoft(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Encapsualtion for the packets."
::= { premoteNodeEntry 13 }
pRNIpAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"LAN IP address of remote node."
::= { premoteNodeEntry 14 }
pRNTransferRate OBJECT-TYPE
SYNTAX INTEGER {
64k-or-56k(1),
56k-only(2),
Modem(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Transfer rate for the call to this remote node."
::= { premoteNodeEntry 15 }
pRNIdleTimeout OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Idle timeout for this remote node."
::= { premoteNodeEntry 16 }
-- Node: pRemoteUserVariables
pRemoteUserTable OBJECT-TYPE
SYNTAX SEQUENCE OF pRemoteUserEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each row of this table provides a remote user entry."
::= { pRemoteUserVariables 1 }
premoteUserEntry OBJECT-TYPE
SYNTAX pRemoteUserEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The object type of the rows in pRemoteUserTable."
INDEX { pRUIndex }
::= { pRemoteUserTable 1 }
pRemoteUserEntry ::= SEQUENCE {
pRUIndex INTEGER,
pRUName DisplayString,
pRUActive INTEGER,
pRUCallBack INTEGER,
pRUCallBackNumber DisplayString,
pRUCallBackOverride INTEGER,
pRUClid DisplayString,
pRUIdleTimeout INTEGER
}
pRUIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The row number of this remote user."
::= { premoteUserEntry 1 }
pRUName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The name of this remote user."
::= { premoteUserEntry 2 }
pRUActive OBJECT-TYPE
SYNTAX INTEGER {
No(1),
Yes(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Determines if remote user is active or inactive"
::= { premoteUserEntry 3 }
pRUCallBack OBJECT-TYPE
SYNTAX INTEGER {
No(1),
Yes(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Determines if callback is enabled for this remote user."
::= { premoteUserEntry 4 }
pRUCallBackNumber OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The callback phone number of this remote user."
::= { premoteUserEntry 5 }
pRUCallBackOverride OBJECT-TYPE
SYNTAX INTEGER {
No(1),
Yes(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Determines if the callback override is enabled for this remote user."
::= { premoteUserEntry 6 }
pRUClid OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The CLID number for this remote user."
::= { premoteUserEntry 7 }
pRUIdleTimeout OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The idle timeout for this remote user."
::= { premoteUserEntry 8 }
END
]]>